Calcium Carbonate Masterbatches

Calcium Carbonate Masterbatches in PE, PP and PS carrier. Extensive Standard range.
Tailor made products.
Calcium 1 Calcium 2 Calcium 3
What makes them special :
Exceptional Softness
Superb Dispersion Quality
Excellent Whiteness

PE calcium carbonate masterbatch: used for PE film, PE sheet, PE pipe, PE bottle...

PP calcium carbonate masterbatch: used for PP sheet, PP pipe, PP yarn, PP injection mould...

PS calcium carbonate masterbatch: used for PS sheet...

Transparent filler masterbatch: used for clear LDPE/LLDPE/HDPE film, clear PE/PP sheet, pipe, bottle...

 

Film Blowing & Bottle Blowing Grade
Series MI ( g/10min) Whiteness(%) Density (g/cm? ) Adding ratio Application Feature for film
01 3.0-5.0 >80 1.68-1.73 10-30% opaqe HDPE film & mulch film common & moderate quality
02 2.0-5.0 >70 1.65-1.70 10-30% transparent HDPE film moderate & high quality, good transparency
03 1.5-3.0 >85 1.65-1.70 10-30% opaqe HDPE film & mulch film high quality, good tensile strength
04 3.0-5.0 >85 1.65-1.72 10-50% opaqe HDPE film & mulch film high quality, good smoothness & hand-feel
05 6.0-8.0 >80 1.65-1.70 10-35% opaqe HDPE film very high quality
  • LDPE/LLDPE grade available as well.
Film Casting Grade
Series MI ( g/10min) Whiteness(%) Density (g/cm? ) Adding ratio Application Feature For Film
01 1.5-3.0 >85 1.65-1.70 10-50% cast film moderate & high quality
02 1.5-3.0 >85 1.68-1.72 10-50% cast film common & moderate quality, good tensile strength, rigid hand-feel
03 1.5-3.0 >85 1.68-1.72 10-50% cast film high quality, soft hand-feel
Fibre Spinning Grade
Series MI ( g/10min) Whiteness(%) Density (g/cm? ) Adding ratio Application Feature For Tape
01 3.0-5.0 >85 1.65-1.70 10-30% PP/PE Fiber Tape high quality, no dust, flat & smooth
02 2.0-5.0 >85 1.65-1.72 10-30% PP/PE Fiber Tape moderate quality, no dust, flat & smooth
03 3.0-5.0 >85 1.68-1.75 10-30% PP/PE Fiber Tape common quality, no dust, flat & smooth
  • Mostly popular for rafia sacks and rafia bags.
Hollow Sheet Grade
Series MI ( g/10min) Whiteness(%) Density (g/cm? ) Adding ratio Application Feature For Sheet/tray
01 3.0-5.0 >85 1.68-1.75 30-50% sheet/tray high rigidness
Extruded Sheet Grade
Series MI ( g/10min) Whiteness(%) Density (g/cm? ) Adding ratio Application Feature For Sheet/tray
01 3.0-5.0 >85 1.68-1.75 10-50% PP/PE sheet/tray flat and smooth, no dust
Injection Mould Grade
Series MI ( g/10min) Whiteness(%) Density (g/cm? ) Adding ratio Application Feature For Sheet/tray
01 7.0-9.0 >90 1.55-1.65 2-10% ABS & PS injection mouldy flat and smooth, no dust, reduce shrinkage
02 3.0-5.0 >80 1.68-1.75 10-30% PP injection mould flat and smooth, no dust, reduce shrinkage