Additive Masterbatches Grade- IV

PRODUCT ANTI-BLOCK MASTERBATCH SLIP ADDITIVE
MASTERBATCH
NUCLEATING AGENT
MASTERBATCH
PRODUCT CODE PA 1 1 PA 12 PA 13
PRODUCT DESCRIPTION MASTERBATCH BASED ON
HIGHLY PURE
PRECIPITATED SILICA
ADDITIVE.
MASTERBATCH BASED ON
COMBINATION OF PRIMARY &
SECONDARY ANTIOXIDANTS.
MASTERBATCH CONTAINS
FINE PARTICLE SIZE TALE
CARRIER RESIN PE PE PP
% OF ACTIVE INGREDIENT 20% TO 25% 10% 70% - 75%
EFFECT OF MASTERBATCH REDUCES BLOCKING
TENDENCY OF TWO FILM
SURFACES IN CONTACT
WITH EACH OTHER.
PREVENTS DEGRADATION OF
PLASTIC DURING PROCESSING
AND OR EXPOSURE TO
ATMOSPHERIC OXIDATION.
INCREASES STIFFNESS OF
EXTRUDED /MOULDED PRODUCTS
APPLICATIONS LDPE, LLDPE FILMS LDPE. LLDPE. HMHDPE. HDPE
FILMS. PIPES. ROTOMOULDED
TANKS. BLOW MOULDED
CONTAINERS. ETC. FOR
REPROCESSING OF PLASTICS.
BOX-STRAPPING. HM BAGS
WOVEN SACKS. TARPAULINS.
FIBRE ETC..
LET DOWN RATIO 0.5% TO 1.5% 0.5% TO 3% 5% TO 20%
FURTHER INFORMATION BLOCKING TENDENCY IS
MOST COMMONLY
OBSERVED IN PRODUCTION
OF THIN LDPE. LLDPE FILMS
AT HIGHER PROCESSING
TEMPERATURES AND DUE
TO HIGH WINDING
TENSIONS
BLOCKING TENDENCY
INCREASES WITH CORONA
TREATMENT OF THESE
FILMS.
ADDITION OF ANTIOXIDANT
MASTERBATCH IN VIRGIN
MATERIAL INCREASES THE
OXIDATION INDUCTION TIME
(OIT) VALUE WHICH IS
INDICATION OF TIME TAKEN
FOR PLASTICS TO START
DEGRADATION. DURING
REPROCESSING OF PLASTICS
ADDITION OF ANTIOXIDANT M/B
HELPS IN RETAINING THE
MECHANICAL PROPERTIES OF
THE END APPLICATION WHICH
WOULD OTHERWISE
DETERIORATE.
THIS CONTAINS A SPECIAL
COMBINATION OF FILLERS
TO INCREASE STIFFNESS TO
EXTRUDED/MOULDED
PRODUCTS. THIS MASTER
BATCH IS PARTICULARLY
USEFUL FOR BOX
STRAPPINGS. WHERE
BESIDES INCREASING THE
STIFFNESS IT ALSO
IMPROVES THE EMBOSSING
AND IMPARTS ANTI
-SPLITING PROPERTIES.
IT CAN ALSO BE USED IN
INJECTION MOULDING TO
INCREASE SOME STIFFNESS
AND WEIGHT.
You are here: Home Products Additive Masterbatch Uncategorised Additive Masterbatches Grade- IV